We have recommended the most suitable accessories for the models of Argentina customer loaders. All the products we sell are selected based on the performance of the loader and the comprehensive research on the problems that arise before the customer proposes the machine.
For example, the customer mentioned that a 50-loader can run normally in all positions of empty load, the shifting pressure is low, the whole vehicle is under load, and the engine can increase the throttle bucket to insert into the pile. Then continue to add the throttle, the loader should be propelled normally, but at this moment the vehicle suddenly violently shakes, the vehicle stops propelling, the "dangdang" metal crash sound is emitted at the output flange of the gearbox, and then the accelerator pedal is released. The sound disappeared.
After internal inspection, it is found that the small hole in the body of the pressure reducing valve has been blocked by foreign matter. This hole is very important. When the gear is changed, the pressure oil supplied by the variable speed pump enters the valve body cavity to push the slider to move the compression pressure regulating spring. It will gradually rise and reach the specified pressure, which should be the reason for the low shift pressure. Based on this, we recommend planetary hydraulic shifting to solve the impact of low shift pressure on the performance of the transmission.
Our Nigerian customer contacted us and visited our manufacturing facilities and customer production bases for mechanical parts. They are very grateful to us for continuously improving the latest technology to produce higher quality and high technology equipment. In addition, we take customer feedback seriously.